This review of Voopoo Coils Drag Mini Kit Vinci Too Software Pnp Pod

Voopoo Drag 2 Mini Kit sent me for review Sourcemore

What’s in the box, you ask?

– Slide 2 Platinum Mod
– USB Cable
– GEN smartcard
– User’s guide
– Warranty card

Technical specifications are also important, so here:

– Dimensions: 88.3x51x26.5mm
– Weight: 158 grams
– Batteries: 2 x 18650 (not included)
– Maximum power: 177 watts

specifications of the device, such as those found on the website:

– Material: tungsten alloy resin body
Power range -: 5-177 watts (20watt oldest Drag2)
– Output voltage: 0-7.5V
– Output current: 0-40A
– Yield: 0.05 to 5.0 Ohm
– TC Range: 100-315 C

Building:

It weighs about 217 grams without batteries lighter than alpha Maat VOOPOO Postal much higher. In this case, it was 142.5 mm high with a deposit at the site, at the bottom of 26.5 mm and 51 mm wide.

Good quality slide both platinum and platinum shell itself seems to fade and resistance to scratching. Unlike the original slide, the slide 2 has a slightly curved body to smooth the edges and in turn create a mod is very comfortable to wear.

In addition to the two resin panels and platinum finish create a Voopoo Drag Software feels luxurious in the hand. In addition Drag 2 Platinum is 1/4 the weight of the original path.

 

Without too ‘dislocation’ and you trigger buttons controls respond well. In more detail, precise machining. Furthermore, no burrs or sharp edges and resin panels a good appearance to the ceiling plate. While I believe that the resin panel “jump out” of the platinum finish, if they had been polished.

 

As with the A most online Voopoo Vinci RBA above, the center pin 510 of the jet is good and quite steep. Again the addition to the durability of the core pin spring. But the base 510, which is about 1 mm above the mod. Similar to the X-217, has been established to atomizers stop platinum finished dialing peak point mod.

The battery cover is always the same style as the series fall injuries at the bottom and lift away from the MOD for your battery. However, one point to keep in mind that there is little movement in the door. But it should be 0.5 mm longer than the company felt the motion in the occasional spray mod.

Equipped with OLED display, easy to read and harder. But in the sun, you can work on the design and not easy to read. While you can read all this at the highest level in Voopoo firmware on your PC.

options menu

– sub menu Mode: M (Custom mode), SN (serial number), EDC (firmware)
– submenu TC: M (Mode measurement), Ω-assembly (series resistance), F (founded TCR)

The menu system took some getting used to, but I would not say that it’s complicated. MOD adjustment with the addition of 1 watt, but the acceleration and non-spherical. It is quite fast though.

experience the power and accuracy of gene chip performance and tensile mode is very good 2. AC, however, is meh. Drag the same as the original, I found an excellent protection for dry and temperatures reaching more or less accurate overall, but TCR exclusive and the largest number, 80 watt limit TC major drawbacks. If we consider the use of cursor 2 exotic vaping coil temperature, you may be disappointed. It is good for the style rolls MTL However, because there is no energy and extra work by default in stainless TCR is required.

This mod is also the FIT mode, which comes with three presets: FLT1 (drums), FIT2 (taste) and Flt3 (cloud). After playing with it for a while, I think the only thing to do is read the right strength and power with power FIT1 into low, medium and high FIT2 Flt3.Voopoo Too Coils recommends using the FIT UFOrce mode in the tank, but trying on the reel, including tank T2 UFOrce arrived disappointing vaporizer.

They also say that this method does not refer to ongoing fixed; I’m trying to MTL coil 0.7 ohm, and I think that was fired was significantly higher than what I want. In my opinion, the definition of fashion is a hit-or-miss, and found no real use for it.

Mode:

source mode

In power mode, the power can be adjusted from 5 W to 177 W.

Access to custom mode, the serial number and the software version by holding the + and – buttons simultaneously.

FIT mode

There are 3 modes setting mode, each trying to calculate the best settings depending on the strength of the tank. In this case, when the right way and be trained to work, but sometimes bad.

1) Saving Battery mode – low cost, but tries to maintain a sense of the battery. In addition, although the flavor is weak, it could be a lifesaver if you get caught short without a battery backup.

2) the value of a sense of focus mode – When done correctly, the result is brilliant and can not match the taste in watts manual. No doubt, when the FIT mode is better than back in the manual feed mode.

3) Cloud Extras Mode – A little less flavor and cloud electric stepping into apparently only a slight difference.

Presumably, by changing the pulse width modulation mode setting to change this.

TC mode

temperature control mode has a stainless steel (SS), nickel (Ni), titanium (Ti).
Furthermore, access to custom mode, the cooling coil and the values ​​of the coil retention ratio + – buttons simultaneously.

Pro

– pleasant to touch and not too big
– Lightweight (45grams lighter to be exact)
– It looks great with platinum mirror finish
– resin colors
– shoot very quickly, almost instantly 0.025 sec
– Chip strong GENE.FIT
– No buttons Rattle, solid!
Life – a gene chip battery managing very well.

fraud

– Battery door rattle / loose and not as comfortable as I want
– resin fact can not be removed because it changes color.
– The screen looks somewhat aligned Nona, part of the power mode W interrupted or could not be seen if we look at the angle (Perhaps this, not all).
– a magnet for fingerprints … should end mirror
– Prominent 510 of about 0.5 mm which causes the space between the tank and the mod, Ras best IMO.
– Not only is resistant to scratches, give me some small scratches for several days during use. A little disappointing …

 

Conclusion:

My biggest problem with the Drag 2 mod is the vacuum created by the lifting platform 510, followed by reading the battery cover. If you do not mind the inconvenience, and if you will not use the TC mode high power, might be to your liking. home prices were reasonable, accurate and smart fixes some issues demand predecessor. Simply slide innovative as the original, but it does the job.
So I realized that I had raved a bit and quite possibly lose a few points that will try to summarize the key points below:

How:

resin panel itself mod
I love how easy it is to fill the tank
Mod plague almost instantly
mesh coil N3 gives a good flavor
easy control of water flow
a set of very good vaporizer
How:

resin panel itself mod
I love how easy it is to fill the tank
Mod shoots almost instant
mesh coil N3 gives a good flavor
easy water flow control
a set of very good vaporizer

It can also be used Voopoo Pnp Pod Kit mesh coil (not pro) with the reservoir

neutral

Regardless Drag the logo – a good hate
TC can not test mode
And slightly raised center pin 510

I do not like

The instruction manual for the mod is useless.
Switching modes can be good – but because of this, it is useless.
I personally do not like the menu system, but that’s just me.
Easy to damage the paint on the frame.
battery cover shifted a little boring.
The taste of a tank, but I notice that the Falcon with Horizontech as superior.

I usually quite this kit. It has its drawbacks, especially Voopoo can be easily provided if desired. In particular, the menu system and lack of information on how to ride.

I recommend it? Based on my own experience with the slide 2 Mini, I would say yes. It is far from perfect bit of kit for me, but I use it every day and you can see this mod takes me a long time. Mini slides loves his other half and really think this could be a device that pieces of wood that has cancer.

For more information, including technical specifications slide 2 Please follow this link
Pulverize VOOPOO® – Moments Spark – Drag | great vaporizer | Vapor Cigarette | CIGS | E Cigarettes | E cigarette supplies | vaporizer young

Feel free to leave comments because I have never written a review and I appreciate tips. Particularly painful to write about my phone !! Voopoo Please send the kit.

Thanks health cabin

You can buy it here: Voopoo Coils

This review about Voopoo Nano Drag Mod Vinci Too Nano RBA

Hi all, Anthony dizzy again here with my fish Voopoo Drag 2 Mini Mod, please see below for rejection and links. This entry is not marked as a version of the sample.

 

Introduction:

Voopoo Vinci Mod fish is the last producer of the popular Voopoo vaporizer.

They have become very popular in 2017 with drag mod mod is affordable well-built, when it was released, but in recent times somehow fell due to a long list of products that behind the curve, so we’ll see if Finic the fish could change. Have things well done as mini-mods to boost domestic battery and double 21700 x217 mod is not much competition, but their pods, tanks and recently obstacle 2 has been disappointing. Fish is a unique style with Pea Pod AIO and built in rechargeable 350mAh and breathe fire. It is available in 6 colors dark gray, blue, white, cross, marches and flaking. Looking around online that are available for pre-order only China for around $ 20-25 and pods are about $ 3 each, I have seen the price points so far so good.

Specifications of the manufacturer:
Dimensions: 56 x 66 x 13 mm
Capacity: 1.7 ml
Battery: 350mAh
Material: Plastic + PCTG
Resistance: 1.6ohm
Power range: 7-12W
Output voltage: 3.2-4.2V
Weight: 27 g
Color: white, dark gray, blue, pass, Quama Cruz
Included in the box:
1 x Fish Game VOOPOO Finic
1 x USB cable
1 x Manual
Warranty Card x 1
Highlights of the reel
1.7 ml 1.6 ohm pod fish Finic
Albums
album

 

summary kit

Voopoo Finic style fish “fish” AIO (all in one) kit pod, which means that Voopoo Too Mod or a separate reservoir that can be used with other things.

Pods have replaced parts, but sold separately and coils integrated into the nacelle in order to replace all the Renova or zero sheath Innokin EQ. Was a good size, at the end is not too small, but not much. It was pretty close in size to half of the sheath. No air is adjusted so that most of the pods. It was not much, but it was cold when the pods have adjustable air, but not really the norm these days is not only an advantage to have. It has an average capacity of 1.7 ml (TPD if consistent). 350mAh battery is stored in so little on the small side IMO. Having .4a loading list for the integrated USB user. I tried 2 times with USB meter and the rate charged for a maximum Ranked .41A so good there. He is fully responsible for approximately 1 hour. 2 Size of test kits know that between 362 and 364 mAh. Not to overstate what the list, which is all I’m looking for sorting too. did not have a good passing strange vaping. by sophisticated drip it owned and is part of the vehicle itself. Voopoo Finic fish is very well built, lightweight, because the plastic body and has a nice rubber layer. the color is also very nice. I jumped is colorful designs and looks like a tropical fish with scales. No wear on the lining of the mine so far.

Pods attached to the battery and the magnetic system is easy to get in and out and adjust so there is a very good job and fit in with the movement or play. To remove the veil is removed only. The filling is a standard rubber stopper as an interesting, also work. My complaint if there is no ventilation hole and the hole is too small for the front of your typical plastic bottles. Make the most difficult filling than it should be. Finally, I use a bottle filled with a metal tip, which is very thin which makes it very easy. They have to make the hole larger so that it can insert the tip of a standard plastic bottles and has space for the air vent or release.

This usage is quite simple. It was a breath of fire for the device without buttons. No mode or settings, or on / off. Just a simple breathing device is very simple. It works well most of the time, but time and out of a breath of air so that the sensor is not as good as it should be. I’ve also had some failures. LEDs on the top and nice and bright and easy to look the part part. When you vaping color lets you know the battery. Did not elaborate, but unfortunately based on images in manual means, green a total of 60%, 20-60% by blue and red is 20% or less. battery indicator is pretty good is not great, but not bad. sheath is approximately half open, so must change inside out or remove the basket to see the level of juice when vacuum is medium. In addition pod color it is too dark. I do not know how many times I have to show in the comments, but makes it very difficult to see the level of juice. Obviously, it would be better pods.

performance and details of the coils

Voopoo Drag Nano Pod comes with a sheath disappointing 1. All kits should include always two coils / pods. There is only one choice of coils is 1.6 ohm coils.

There is no good in the material specification wire. They have sent more so you should wear gloves that come with. I use all the juice salt IAS 50/50 and 60/40 from 20 to 25 mg of nicotine. That said, it’s not a bad flavorwise. I think the level 2. I am better, but it was more than enough for the pod system. This is not a good vaporizer chain, even if you only get 2-3 breaths Then you need to give a few seconds for rewick. live rolls were not good. I reached about 5 ml using media if looking at the basket winding. Usually this is not happy living pod, but good enough taste.

Pro:
colors (six in total)
The average capacity to 1.7 ml
good quality batteries
Beautiful unique style fish
LED lights on the battery meter
good rubber layer
suitable size for easy portability
a solid record for the size of the battery charge and load
cost is quite fast (1 hour)
the good taste of monodosis System
The pods are easy to remove and install
battery meter good enough
the price point for the device and the coil
deficiency:
not a good life rolls
pod filling the hole is too small
No door vaping
the battery is a bit on the small side
equipped with a nacelle
weak breathing fire
difficult to see the level of juice (juice windowless, dark colored sheath)
conclusion
So, with all that said, I recommend this kit POD or not? I do not like that hard or not, and this had to lean no. Life is the largest circulation of the murderer for me, but it only covers one of them, fill gaps small, fragile air sensor without spending too much for me to ignore. If the design is nice, I was little I liked the rubber coating, but they need better equipment and set some weaknesses. I will not add CER spreadsheet linked below.

It was Anthony fried keep only honest, I hope you all can say the same and I will take the next revision.

rejection of the products

This product was sent to me Voopoo Pnp  RBA

comments disclaimer
Because of the differences may QC your experience may be different.

critical warning
I made a vaporizer review since late 2016 and has made over 300 comments from users. I like attendance and contribution to society vapers great vaporizer forums. Not “unusual” reviewer. I do my best to be full at all times and have considerable experience with many products say what is good and what is not. All modifications are tested with an oscilloscope and the test voltage and the results are shown in my opinion.

Voopoo Vinci is one of a very small, very convenient to use and very easy to use. In the package with this device, you receive two rolls are very good. This device can be purchased in a variety of colors that other good stuff here. Build quality is good and everything looked very solid.
DL tip suitable for vaping. The cartridges have a very good place and there is no possibility that it could fall and you can also view emails either liquid cartridge. 5.5 ml capacity cartridge depends on the coil you use and an excellent ability in my opinion. You can use this device with many rollers, but these devices are compatible with the head of the RBA is great because you can save money by making your own coil. I think this is pretty strong DTL vaping device. Here you can put the back of the cartridge in slot 2 different ways, so you have 2 options airflow, if it becomes a way for the airflow is greater and if you go the second way will fewer air passage bottom of the cartridge, see condensation of fraud and the need for a clean river.
This device has a shutter button and you can choose how you want to use this great device. shutter button went smoothly and also has automatic image works. A good screen, and you can see everything that is good on the screen and a color screen and looks great. This device has a battery capacity and the integrated 1500mAh battery and will need 1.5 hours to recharge the battery. Each time the cartridge is placed in the slot devices that regulate eating coil and believe that the functions like, but many will not.
I like 0.3ohm coil of this device, it tastes very good and works well, but I think that most coil 40W, anyway 0.3ohm coil is really great for taste and vapor production. He tried to run me the RBA, but hopefully soon, still very good had the RBA for this device.
I can tell you about building a device that works well, it has a screen and easy to use, the head of the RBA can also make your own coils are very nice.

 

deficiency:

– Condensing bottom of the cartridge

 

Pro:

– Choice of colors
– Good build quality
– Two coils in the package
– Automatic image and the shutter button
– Color Display
– the cartridge is still very good in the groove
– easy to fill
– You can see the inside of the cartridge eLiquid
– blow
– comfortable to use
– Easy to use
– Compatible with many rolls
– Coil Head Rba
– for a capacity of 5.5 ml
– Easy to replace the coil
– Two options airflow

 

health cabin thanks

You can buy it here: Voopoo Nano

 

That review about Uwell vape pod caliburn Nunchaku Amulet Crown IV

I received a Uwell Nunchaku 2 the purposes of this review.

Nunchaku 2 colors:

– blue
– Black
– money
– iridescent

Specification:

 

– Size: 29.9 mm x 100 mm
– Material: stainless steel, polycarbonate
– Battery Type: 18650/20700/21700 individual cells (not included)
– Power Range: 5-100W
– Operating mode: the power mode, the TCR mode, fashion Mech
– Resistance range: 0.1-3ohm (VW); 0.1-1ohm (TC)
– Temperature: 100 ℃ -315 ℃ / 200 ℉ ℉ -600

features:

  1. powered by a single battery output 100W max 18650/20700/21700
    2. The different modes: power mode, mode TCR and Mech
    3. PCBA is dustproof and moisture-proof, to effectively protect the device central unit
    4. The chip has multiple circuit protection features to ensure stability, security and reliable performance
    5. Sensor 6-axis motion of a new operating experience
    6. 5V / 2A fast charging, which reduces charge time
    7. Available in 4 colors: silver, blue, black, colorful

 

In the frame:

– Good nunchaku 2 Mod
– 18650 Arm
– Micro USB Cable
– User’s Guide

caliburn uwell is an improved version of the previous model nunchaku.This device comes in 4 different colors and designs of this model is the same as before. Personally, I really like the design of this mod and nunchaku is very convenient to use if you like the tube mods.
mod build quality is very good and I felt very good in the hand. You can see some details of the Department of Defense, you can see the “nunchaku and 2” and under the battery cover, you can see the “nunchaku and 2” and its Web page. This mod works 5-100w mods and mod work with the media. Nunchaku 2 supports 21,700, 20,700 and 18,650 batteries were really good.

From the top you can see the connection and cable model is here, I have no problem with my atomizers and PIN is gold plated and spring here.

This mod, can be used up to 26 mm diameter in Crown vape without a good projection for me.

Sub mod have a battery cover and the battery cover, you can see some details that helps when you want to open the lid of the mod. Put here is really good. If the battery cover is removed, you can see the orientation of the recorded battery. As I said, this device supports 21,700, 20,700 and 18,650 batteries. Generally, you will receive an adapter to 18650 if dont’t 21,700 batteries. Personally, I really want to use the 21700 battery and think it’s great that this device compatible with battery 21700. On the back of the Caliburn Pod. You can see a USB port that can be used to charge the battery, and this mod support rapid charging, but as usual, I suggest you use an external charger.
Before the mod, you can see the buttons on the screen and fire.
fire button on this unit stand out, very clicky and details that really count a lot in it. As the trigger works very well. The device’s screen is small, but the brightness of the screen is very good and you can see the information on the screen without any problems.
As you can see, we do not have the keys and less, but we have a sensor that is used here.
In addition, the board of the device is resistant to dust and moisture-proof is excellent.
To activate it you must click five times on the fire button to turn off the mod should you do the same thing.
When the screen, you can see:

– W
– process
– coil resistance
– The battery indicator

To enter the menu you must click 3 times on the shutter button and enter the menu, you’ll see:

 

– Supply Mode
– TCR Mode
– Mech Mode
– The factory settings

If you want to customize your power, you need to click 3 times on the shutter button, then you must

select a power mode and after that you have to tilt the mod right to increase or left to lower watts of power. In the same way, when you enter the menu by pressing the shutter button 3 times mod must lean left or right to scroll. Uwell Crown IV,works very well and once when you are used, you can customize almost everything easy and hassle.

 

Protection on these devices:

 

– Short-circuit protection

– Low-voltage protection

– Temperature Protection

– the reverse battery protection

 

 

 

How do these devices work and my thoughts:

 

Amulet Vape is an improved version of the previous model.

The design of this device is similar and I love it because this mod is very convenient to use and I really like tube mods. mod good building quality, feels like a very dense morning. This mod, you can use up to 26 mm diameter atomizers no more for me. the previous model is only compatible with the 18650 batteries, but they have changed and are compatible with a larger battery that is really good. Because of this mod is compatible with a larger battery is slightly larger than the previous bite. the shutter button is very nice and convenient to use and remember that the previous model E every day, I have no problem with the trigger, i belive that is also going to be very good in the future. The sensors have here works very well and really used to it quickly and once you do, you will be able to adjust quickly and smoothly. mod mod is very simple to use than many people would like. In addition, it is very good that this board mod dust and moisture resistant. So far, this model works well and remember how long I was using the model before believing that I use for a long time without any problem.
If you like the previous version, but you want the version that you can not mod 21,700 to make a mistake with this one, and in this case, of course, will tell you about it.

 

deficiency:

– No plus and minus buttons, one does not like, I personally really Sensor, and it works very well and once you get used to not have a problem

Pro:

– The build quality is good
– atomizers diameter 26 mm
– a good fire button
– The sensor works well
– Easy to use
– comfortable to use
– Good Topics
– Compatible with 21,700, 20,700, 18,650 batteries
– a good screen brightness
– The board is resistant to dust and moisture proof
– Given the quality of the previous model painting, I can tell a good painting
– No mod leftovers when shaken

 

 

sourcemore thanks

You can buy the kit here : Uwell pod

 

Voopoo Drag Nano Platinum Vinci Tc Box Mod Manua Pnp Coils review

I received Voopoo Vinci X the purposes of this review.

 

Voopoo x color:

 

– P-aurora

– Pink

– Blue P-Prussian

– P-purple jade

– P-red

 

Specification:

 

– Power range: 5W-217W

– Battery: 21700 * 2 (Compatible with battery 20700/18650)

– Output voltage: 0 V – 7.5 V

– Output current: 0A – 40A

– Resistance Mode Power range: 0.05 to 3.0, 0.05 and 1.5 TC fashion

– Temperature: 100-315 / 200-600

– Dimensions: 93 * 50.6 * 33mm

 

In the frame:

 

– x217 217W TC

– 18650 Battery Adapter x 2

– USB Cable

– User’s Guide

– GEN smart card

– Warranty card

 

Voopoo Drag 2 Platinum is powered by two batteries and this work mod to 217W. Each time Voopoo Too 180w Tc Box Mod also has a genetic chip that, in the opinion of my good chip. Mod Size: 93mm x 33mm x 50.6mm. I like the design of this model, I will change a bit, but basically this mod looks amazing in my opinion, very nice mod. On the side you can see carbon, behind the mod, you can see the beautiful resin panel, also on the back you can see engraved “Voopoo” on the shutter button, you can see the resin and down each less and less buttons, you can see the logo.

 

From the top you can see the connection of stainless steel screw on top of the MOD and this part was very good good son, I had no problems and we also have here a spring pin gold plated 510. the like top of the mod atomizer scrathed never in my mod could not see scratches on top. In this mod, you can use up to 33 mm diameter was amazing atomizers, it can be used essentially the atomizer here almost false.

 

Sub mod, you can see the battery cover and this section seems so far and I hope it remains good because it is a very important part of the mod, so I told her look good on the cover of the battery can see the vent hole and you can also see sculptures. When the battery door is open, I can see engraved on the orientation of the batteries inside. This mod works with two batteries 21700 20700 or two batteries and also if you do not have 21,700 or 20,700 18,650 batteires be used with an adapter that will receive the package. It is very good in my opinion because I want to use two batteries 21,700. When the Ministry of Defense is stirred with battery inside can hear the rattle of the battery will be a disadvantage for some people.

Before the mod, you can see the shutter button, the screen, the less buttons, USB port and quite large LED light.

fire button on this mod is great, I like resin on the shutter button, shutter button is also very Voopoo Drag Manual and it works great, no fire was completely lost, the button works great shot every time. More Button Work least as well without any problems.

USB port on this model can be used to update the software model also balanced so you can charge your batteries here if you have no external battery charger charging, but as usual I suggest you charge your batteries in an external charger.

In the picture you can see how to wear a visible light on the device. You can change the color of the light or if you do not like the light pipe can be disabled.

The screen of this device is precious, the screen size is 1.7 inches and has a color screen. On the screen, you can see very clearly all the good information. On the screen you can see:

 

 

– Two battery indicator

– process

– (mode according which it is used) Watts / temperature

– Puffs

– Time puff

– coil resistance

– Volts / Watts (according to mode is used)

 

To activate the mod must click five times on the fire button to turn it off, you must do the same. You can also lock the device in order to do this, you keep the shutter button and a button, you must also do the same with open mod. When you lock your device can not be used.

Each time you click 3 times on the shutter button you can choose from:

 

 

– Standard Mode

– Tc Fashion

– The functions

 

 

 

When you are working in standard mode or TC mode and maintains more buttons and less get more options. If he keeps the plus and minus buttons below the “function”, see:

 

– Lock Menu

– select Clock

– Brightness

– Led select

– Fund selecting Screen

– Select the language

– Time to choose

– Set date

– screw system

– Exit

 

 

 

As you can see, on your device, you can do a lot of that will appeal to many people, you can adjust the screen brightness, mod has the time and date, you can set if dizziness to equal him and you can change the wallpaper of interest. Anyway, this mod has a lot of very nice selection.

 

A protection device:

 

– Protection of autoliquidación

– Short-circuit protection

– Protection of overtime

– Protection against overheating

– Output protection overcurrent

– Overload protection

– balanced load

How do these devices work and my thoughts:

 

As I said I really like the design of this model, maybe I want more resin in the mod, but basically it looks great in my opinion. Mod good shape, got up very nice in hand and this mod is very comfortable to use. At the beginning I did not like the position of the shutter button very fast but I got used and now I love it. large fire button, which works very well and I think the resin in the fire button detail was good. The colors in the great modern look, so far no scrathes on mod, maybe a little at the bottom of the model, but almost nothing, a very good job with color here. In this mod, you can use up large atomizers 33 mm diameter. The battery cover looks good so far and I hope it will do the job in the future. We have here a bit stupid when you put the battery and rocked the mod, you can hear the noise. You can also charge the battery of a mod, but as I said I recommend that you can charge your batteries in an external charger.

big screen, much of the information we have on the screen and you can see all the information very clearly. I also like it here we have the color screen and I like the choice of this unit. I believe that I like that I can use here Batterries 21,700. large genetic chip, which works well and I have no problem.

So basically x217 well-built model and it works great with everything you have many options here, and if you like the design that can advise this Voopoo Pnp Replacement Coils

.

 

 

 

Drawbacks:

 

– Rattle battery

 

 

Pro:

 

– comfortable to use

– Good quality

– Good Color

– You can use the battery 21700, 20700 or 18600

– Chip works well gene

– Color Display

– The times and dates

– You can change the wallpaper

– Both the shutter button and the plus and minus buttons

– can be used up to 33 mm diameter atomizers

– Battery load balanced

– Led screen

– You can change the display brightness

 

 

sourcemore thanks

You can get the device here: Voopoo Drag Nano

 

This about IJOY Captain Mercury Jupiter Shogun Diamond Bae review

Captain IJOY come in several different colors:

– Black
– H.H
– Rainbow
– Gun Metal
– blue
– Red
– Purple
– Green
– Gold
– White

Specification:

Saber 100 MOD

– Size: 97 (height) x 29 mm (diameter)
– Maximum power: 100W
– Output Mode: VW
– Resistance Range: 0.05-3.0ohm
– Battery type:
20,700 battery (DC discharge = 40A, inclusive),
18650 battery adapter (continuous discharge current = 25A, not included)
Compatibility tank – There is nothing wrong with the tank 25 mm
– Topic: About 510

IJOY “and” Tank Diamonds “on the upper deck, you can see engraved” IJOY “and diamond engraving. Under the previous limit, you can see some of the details and the details of the same diamond ring to adjust the air flow ..

sub-ohm tank equipped with a diamond tip very good drops, two rings and O end drops drops very ends in place. You can not use here 510 or 810 drip tips. You can unscrew the tip of the wire to the base. I love this decline, which is more comfortable than the end of the dripping of a baby version of this tank. The decrease from the end of 16 mm, the diameter of the tip 10 drops mm.

It is the top spray filler and can remove the top cover is very easy, you just need to turn up and it is, you can fill the tank without problems, two details engraved on the upper deck of much help when you want to open the top cover. Capital letter output, you can see a large hole for liquid letter, so it may not be a problem, even with a large bottle. To fill more fun.

It is equipped with a spray tank glass bubble glass bubble tanks with a capacity of 5.5 ml, which was very good. colored glass bubbles, you can view the image as it looks. Also in the package, receive another glass container tank capacity of ordinary glass and ordinary glass tank is a liquid 4ml letter, which remains a large capacity. I use a glass bubble tanks because it seemed best for me and the tank has a larger capacity. Also, if you like, you can buy a diamond tank with a tank capacity of 2 ml.

Vape IJOY shogun

– Diameter: 25 mm
– Height: 56.5mm
– Capacity: 5.5 ml (with plain glass tube 4 ml) (standard) / 2 ml (Version TPD)
– coil: coil 0.15ohm DM-Mesh (40-90W, pre-installed)
DM DM-Coil 0.15ohm (40-90W)
– 810 sophisticated edge drops dripping resin
– Subject: 510

features:

Very compact, portable pen style
CNC engraving with attractive colors
Compatible with single battery 20700/18650
The maximum output of 100W with advanced chip IWEPAL
custom buttons fire pentagonal
bright and large screen
custom single-user mode
Beautiful tank subohm with diamond design stylish
180 ° load screws set up
New DM DM DM diamond-mesh coil and coil

 

In the frame:

– IJOY SABER 100 (100W)
– 20,700 IJOY battery
– 18650 Adapter
– DIAMOND TANK SUBOHM
– DM-Mesh 0.15ohm coil (40-90W I installed)
– 0.15ohm (40-90W) coil-DM DM
– Replacement Glass
– Toolbox
– USB Cable
– Guarantee card

IJOY Diamond Bae come in several different colors, I received it in color stainless steel. The diameter of the vessel sub-ohm diamond is 25 mm, the size of the deposit is 56.5mm. the build quality is good and is very similar to a smaller version of the tank, of course, it is bigger and a couple of different things.

You could see the sculptures in the atomizer, at the bottom you can see engraved “Designed by IJOY” and “Diamonds Tank” on the upper deck, you can see engraved “IJOY” and diamond engravings. Below the previous limit, you can see some details and the details of the same diamond ring is adjusting air flow ..

This deposit will receive two coils, two coils are coils networks. This winding is pre-installed DM – mesh coil, the coil resistance is 0.15ohm was recommended that the supply reel is 40-90w. Replacement coil packet receiving DM DM coil, the coil resistance is 0.15ohm, it is recommended coil power is 40-90w. Before filling the tank, it must be the first coil with a few drops of liquid and because this way Pod IJOY jupiter will be avoided when winding starts, can fill the tank and can be used without pull away.

For spraying, you can buy a head coil RBA to install their own, it is a big advantage, because if the tank, you can save money by RBA head coil.

atomizer is compatible with several rolls:

– X3 – C1, resistance coil 0.4ohm, suggested strength 60-90w
– X3 – C3, six coil, coil resistance is 0.2ohm, suggested strength 90-110w
– X3 – C2, the coil resistance 0.3ohm, suggested strength 60-100w
– X3 – C1S, wood pulp and cotton, the resistance of the coil 0.35ohm, the proposed power 40-80w
– X3 – Mesh, wood pulp and cotton, the resistance of the coil 0.15ohm, the proposed power 40-90w
– X3 – RBA
– DM – C2M, 0.3ohm coil resistance, the proposed 60-100w
– DM – C1M, this resistance 0.35ohm coil, the proposed force 40-80w
– DM – DM, this 0.15ohm coil resistance, suggested style 40-90w
– DM – Mesh, this resistance 0.15ohm coil, the proposed force 40-90w

 

Thread a very good base, you can almost effortlessly changing rolls. The tank bottom, you can see more than 510 gold plated pin is also good here.
No flow control at the base of the ring and two air holes for ventilation. You can easily adjust the air flow, which you settle on the one hand, it will be the same on the other side.
The air flow is different between this version and the baby version of the atomizer, the air reservoir diamond diamond baby, also controls the air flow ring here is a bit more flexible, but still works well.
How does it work? Atomizer:

Very simple tank sub-ohm, can easily fill, have a very large hole, so you will not have any problems with filling and can be changed easily and quickly reel you.
You can not use your suggestions here 810 and 510 drops, if this could be a trap for someone, but I think it is very convenient to use and are not a problem for me. Coils worked well, no tweaks and fluids, 70-30 pg vg use of e-liquid in the tank and everything is almost as good. excellent vapor production. good taste, I prefer the coil mesh DM, I think it’s best to taste and want to use it, Dm dm-coil is also good, but my first thought was a little better.
RBA head also a huge advantage because you can save a lot of money.
This is a very hard tank sub-ohm with good build quality.

 

My joy saber mod

Pod IJOY mercury is arranged tubes. the maximum output power is 100W.

Looks good, in my opinion, this model is 29 mm lower, but above the mod diameter 27.5 mm, but again the 25 mm inner diameter of connection, so it can be used here atomizers 25 mm, it is suspended. Mod is the height of 97 mm, which is not very big mod and for me to be here. sword IJOY is powered by a single battery, it supports two types of batteries that can be used batteries 20700 here and you can use the total of 18650, you will receive 18,650 adapters PRO here in the package, you will receive a 20700 battery, you can use the sword when you take if you do not have a battery. It is encouraging that the battery in the package. build quality is good, there is no waste when the shaking models except the shutter button, you can hear the shutter a bit, but everything else was good. We can see some details about the mod, mod you can see engraved “IJOY” top model, you can see engraved “Mei you spray force” under the battery cover, you can see engraved “designed by IJOY”. Pin 510 stainless steel spring IJOY sword and gold plated.
In the Ministry of Defense, you can see the USB port to charge and update the firmware, you can charge the battery of a mod, but I recommend using an external charger.
On the model side, you can see the shutter button has a diamond shape that looks great, dislocation, but have little to play a bit when the shakes in the morning. projection on the trigger and can be easily found when taken and want VAPE am. shutter works great every time until now there was completely no loss of fire. plus and minus buttons are also good, the buttons are dislocations, even more than the shutter button and when the Ministry of Defense was stirred plus and minus keys are stored.
Just below the plus and minus buttons on the screen, the screen brightness is very good and you can see everything on the screen.
In a smooth battery and child, you can easily change the battery. Also at the top you can see the detail that helps when you want to open the cover mod. The battery cover is ventilation. In Remove the battery cover, you can see how your record must put the battery, but the Ministry of Defense that can be seen are marked with red to change the battery means, the Ministry of Defense also has battery for protection against, if an error is made. Pin on the battery cover is spring loaded.
It is very easy to use this mod, mod is very simple. To activate the mod must click five times on the fire button to turn off the Defense Ministry must click five times the shutter button. With five times the click to activate it, you will see the “Saber” screen and the firmware version. In the model change on the screen, you can see:

– Power
– The battery indicator
– stroke
– Coil Resistance

This model is operated and VW for someone who would be a scam, but for someone who is a great professional sand because IJOY have features that can interfere with people or someone who is basically how complicated everything is very easy and simple.
In this mod, you can reset the counter and breathing do, you need to click 3 times on the shutter button and ask you to reset the counter breathing.
You can adjust the power 5W – 100 W and 0.1 W when the button is pressed the power adjustment is more progressive, but if pressed a total of 1 mg and gradually grow faster.

Some of protection:
– Short-circuit protection
– Low Power Protection
– check Battery

 

So iJoy saber is in my opinion a very beautiful model of the tube, which is highly subjective, but I like the way it looks and the size of it, because this mod is not so much that it is very convenient to use. More recently, we could see a lot of mods tube and I really like, because it can be very useful mods tube.
It works very solid key, sensible heat and fast, used to use this 50watts. It’s nice that the battery pack is 20,700 so if you do not have 20,700 batteries, which can be used. IJOY of 20,700 batteries, which have some of these batteries, 21,700 and 20,700 I IJOY battery, which should last longer and the battery still works well. It is encouraging that in the package there is also an adapter to 18650 and if you want, you can use the 18650 I personally like it can also be used by 21,700, but it does not matter, because you can always use batteries designed 20700. little here, I believe, and IJOY true hope with the next update, I think when the battery indicator appears two bars each time the screen is off and spray missing while pressing the shutter “Saber” and the firmware version of the press and after the second, you can vape, but I think it will be fixed with an update.
Build quiality as I said, very good, once again I have to mention the great benefits of the battery, this model is also very convenient to use and if you like to change the tube configuration of the game as well.

You can buy it here: IJOY

Comments on some products of the brand Ehpro

I received a gift from heaven average Ehpro Cold Steel 200 purposes of this review.

 

The color of the Ehpro Kelpie:

 

– Black

– The corrosion of iron

 

specification:

 

– Size: 25 x 40 mm

– Capacity: 2 ml (a glass bubble tube included 3.5 ml)

– Material: Steel Glass / Steel

– Topic: About 510

 

In the frame:

 

– 2 ml Ehpro Kelpie RTA

– Pre-Spools

– Glass tubes 3.5 ml

– O-ring

– Screwdriver

– Philips head screws

– cotton

– User’s Guide

– Warranty card

– Certification Map

 

Average Kelpie designed by Vic youtube channel vaping With Vic and produced by Ehpro Fusion. There is a coil atomize and is available in two colors, I received a stainless steel. Spray comes in a nice package in the package, receive and cotton rolls, so if you do not, you can use cotton coil and whose packaging is very good, also in the package you will receive a glass bubble tanks. In the upper eyelid, you can see some details are very nice and the air flow ring, you can see some details with adjusting the airflow. In the upper eyelid, you can see the “Kelpie” recorded and you can see the arrow on the room you can see the engraved logo. From the bottom of the atomizer You can see the standard and the information we have here 510 gold-plated pins and thread here either.

 

With the atomizer, you will receive a 810 point drop, drip tip is preinstalled and falls finish a very nice place and I think it is very convenient to use. In the atomizer, you can use the other end of the 810 leaves you if it does so.

This is the atomizer over the filling and have a sliding system here, so basically you just need to push the envelope to fill the tank. In the upper eyelid, you can see the arrow is where you have to push the lid and pressing the top cover, you can see the fill hole and the hole large enough, you will be able to use what the bottle is here without any problems. There is nothing to escape filling the sprayer is excellent. On the upper deck, the top deck is a little loose, I want more tension here, but still above the roof itself Openet never in my pocket so far is good. However, the spray is very easy to complete and can do so without any problems.

 

Atomizer equipped with two glass tanks, a tank regular glass and has a capacity of tank 2 ml, this capacity may be fine for some people. The other comes in the package is a glass bubble tank and the tank has a capacity of 3.5 ml capacity, which is good considering the size of the tank. In this atomizer I want to use a glass bubble tanks to capacity and think this is a great favor, because many people will be using the tank glass bubble. O upper clamp ring of the tank is very good, so basically, the coil can be changed or cotton when it left liquid in the tank well email.

 

Building a platform spray is much more interesting in the construction of a platform can see four posts and a pro here is that it can essentially a coil regardless of coil wound, while the coil wire is on the same side you can always put a reel on building a platform, very big pro in my opinion.

While screw holding reel units lead the fixing screw is good, but a very small screw and it will be a scam, but it is always a good live performance.

In the atomizer is the construction of a bridge, one can see a large number of holes airflow, 30 holes, you can see the air flow, so that the air flow will hit the lower reel and wound coils a very good team. Perhaps it could be better than the holes in a row on each side is not here because the air flow of the last line of drilling spools missing. Also on the cover, one can see two slots wick. Harnessing cotton can almost easy average and can easily be put on the bridge.

Basically, you can see the control ring airflow and ring, you can be seen two holes airflow. You can easily adjust the airflow and that fits on the one hand, it will be the same on the other side, we also have a plug here.

 

How does it work? Atomizer and my mind:

 

Let me start with the packaging, really they are included in the package two coils and cotton because someone uses a packing coil and cotton, I think this is a great advantage and I think that each atomizer should send coil and cotton, as I like a lot in the package, you will receive a glass tank with a tank capacity of the bubble in a better way.

Average construction is very simple and easy, great advantage that no matter how the coils will be able to place the Ehpro Panther on the deck wrapped, but the small screw and defrauding someone, work well without new screws problem. In this atomizer I want to use a coil of 3 mm in diameter and I would advise you to 3 mm coil atomizer, because I think it works better with 3mm coil. Ehpro 101 Pro is very easy, so, I suggest you put cotton as I did in the picture you can see how it looks. It is very important for cotton as I did because of the amount of absorption and no leaks. So if you do everything I no problems with leaks and moisture wicking.

Fill the hole at the top is good and you will be able to fill the tank with a very good bottle, but I believe that the tension in the upper lid should be better, once again, was never opened by itself, even very good.

Average taste was fine, or I could say a lot of taste, but I believe the taste will be better with fewer holes in the platform, but it’s a definite sense hunter.

airflow atomizer is very good, very smooth air flow and air flow really here, also restricts ariflow I like personally and the airflow is very good for me and my style vaping.

So this is a very good repellent especially if you want to buy good taste atomizer, because with it you will get a good taste it is also very smooth airflow and establish a good quality.

 

 

 

Drawbacks:

 

– screw a very small platform

– I want more pressure on the upper deck

 

 

 

 

Pro:

 

– Good build quality

– I love design

– Pointe drip Practice

– Coils and cotton in the package

– No leakage

– easy to fill

– cotton can be changed when the liquid is left in the tank

– The very smooth airflow

– the air flow honeycomb coil

– Excellent taste

– Easy to adjust the airflow

– tank glass bubble in the package

– It’s easy to build

– Is easy axis

– You can put a little matter how the coil is wrapped

 

 

Thank you gift from the sky

Review — Anything Different From Lost Vape Orion

This seems to Smok accelerate the release of new products recently. Today we are here to examine the pod system Smok new kit – Smok Trinity Alpha kit. Before we begin, I ask that anyone here bought Orion Q vape missing or DNA pod kit yet? I’m sure you know a little more about the Lost vape Orion series. Well, you might find a reflection of the Orion kit at Trinity Alpha.

setting:
Dimensions: 91 x 16 mm 38X
Capacity: 2 ml / 2.8 ml
Coil: coil 0.6ohm North Mesh / Mesh-MTL North coil 0.8ohm
Power: 10-25W (SOFT / NORMAL / HARD MODE)
Battery Type: Built-in 1000mAh
Input voltage: 3.3V-4.2V
Output voltage: 2.4V-6V
Load current: 10.7A
Load voltage DC 5V 1A
Resistance Range: 0.4-1.4ohm
Package Contents:
Smok Trinity Alpha Battery
Smok Trinity Alpha Pod vacuum (2.8 ml)
North Mesh 0.6ohm coil
North-MTL 0.8ohm coil Mesh
1 x USB cable
1 x Manual
battery design

As I said above, you will find some reflections on the Trinity vape Lost Alpha Orion series on this kit. Maybe some people like to know what kind of “what is happening with this kit” when you see this image. LOL.

The battery is fully made of a zinc alloy material with the surface of process carefully polished. So you can find this kit so glittery and shiny under the light. colors of the rainbow is always a choice of traditional color in the pod kit. On each side of the battery design so as to provide a form of smooth touch feeling resin. But I’m a little scared so easy to leave fingerprints on the surface and the intermediate metal frame. The truth is that just what I fear. On the other hand, the colorful appearance and shiny and pretty obvious sweet. Now keep in mind that this does not leave a scratch on this kit.

large fire buttons offer more comfort in cooperation. Compare with Lost Orion vape, no power mode function on this trinity alpha kit with single press button to set. Hard mode / Normal / you can choose to use soft. And the corresponding power is 10W-25W.

Meanwhile, there is a security protection to the position of platforms – lock button on the pod cartridge. Unlike the magnetic connection design on the most pod kit, but it is the same as the Lost vape Orion series. Provide special locking button vaping safer if you have a baby that is still being played around you when you vaping. Personally, I would name the baby proof locks.

design Pod

Pod cartridge also comes with a special design in a way. filling filling pull-then-hole brand becomes easier. Compare with the design of the screw Lost vape Orion port, pull light switch and charging on alpha trinity simpler and more efficient. And you can also see the air hole in the charging port next pods.

coil design is inherited from Smok north, which means Trinity alpha pod compatible with the Smok North rollers. North north of mesh nets 0.6ohm and 0.8ohm coil MTL coil included in the package for a range of vaping experience and needs.

With the great success that the kit Smok has been done, there will be more of the same pod Smok kit coil design in the future. Well, you can see this coil design in a box kit – Morph kit 219. Check this kit here, you may find of interest.

Compare with Lost Orion vape?

Honestly, the breakthrough and innovation is what we want to see in the vaping market. Of course, we need to mature technologies in the kit vaping instead of semi-finished products. The Orion lack vape, vape all the happiest love to see a single pod design of this kit. For now, Smok try to learn and reproduce this kind of pod set. Meanwhile, they also make their own adjustments and changes into a single pod kit becomes easier to use. People can not understand why Smok take the path of reproduction because they really have the ability to create and innovate. I do not know either. But we, the fans and vape users, where there is a change, we applaud and support.

Decision

Leave aside in the same general design, trinity Smok alpha pod kit kit is undoubtedly brilliant. Ensure the design of the special representative coil and excellent performance in this kit. By the way, do not forget the integrated 1000mAh battery. Because you can spend more than a day vaping time. Honestly, I hope will be adopted design of traction and filling on a more human and more pod kit. Believe me, you want to try again after the silicone port connector you use the trinity of Alpha kit Smok.

Of course, I would recommend this guy Smok Trinity Alpha kit.

Here: Smok Trinity Alpha Starter Kit 1000mAh

 

Thanks for reading!

Augvape Intake Sub-Ohm Tank review

Hello,

 

Today I Augvape intake tank for inspection, a collaboration between MikeVapes and Augvape. MikeVapes is my favorite so critical on YouTube so my expectations are high on this one.

Many may know RTA admission, earlier taking the series. The particularity of this tank is Clapton mesh metal tape used in the coil, Augvape claim GDR like aroma. We’ll see!

 

In the box:

 

– tank intake Narada Pro Pod System VW Starter Kit

– 1 * Glass Bubble

– 1 * 0.15 ohm regular coil Mesh

– 2 * Mesh Coil Clapton

– 2 * O-rings

– 1 * User Manual

– 1 * Warranty Card

ILike that you get three coils in the kit, do not remember everything I owned tanker which has three coils in the kit. Coils, but not packed or sealed and have a visible fingerprints on them, Augvape hope that the kit will improve the future.

 

Review:

 

This beautiful container with zero brand outside of the tank, right at the bottom. I like simple search tank and that’s what it is. Carved into the “A” over the entire tank provides the right grip for each part. Overall this machine is well done and if the quality of feeling, this tank was the strongest of all the tanks SubOhm I submitted so far, and I have great hands.

Even if the tank is much better with the right lenses; glass bubbles only have a higher capacity (3.5 vs 5 ml) are important to the tank. 5ml is a kind of standard
It is easy to disassemble the entire tank to replace the rollers and cleaning. As the rings also come from the airflow. One thing I was struggling a bit with the touch of a coil with empty hands, it’s a shame they do not understand the removal tool coil to make it a little easier. Coils installed easily.

Top easily filled with 90 degrees of lock key mechanism, as I like the SubOhm tank. Most hat offers a good grip for easy opening. It is recessed seat for the rubber stoppers are inserted into the filling hole, which guarantees a good sealing.

Airflow allows a lot of air, and a beautiful limited edition. I must say that the noise of the air flow is very smooth and quiet enough for this type of tank. airflow ring moves easily and because the peak recorded in the “A” is very easy to get a good grip.

There is only one point decrease in the kit, but it is a net right point. In the bottom limit position because it is too short.

Let us now talk performance. I started with a wire mesh Clapton, just because it is marketed as an innovative taste and upscale. Admittedly, the taste is amazing on this coil, and what I like even more is the fact that it is probably a little warmer than usual coil Mesh, perhaps because of the design Clapton. The sense level GDR? I would say yes, at least very close. The difference with the GDR, however, is that you do not need to buy a Rolls-drop and if the performance you just fall leaves replace cotton. But for those looking for a taste of SubOhm tank with falling rolls is a good choice.

Another coil Mesh does what you would expect from a coil mesh, provides a good flavor and a dense cloud. If I had to choose between the two coils, it will be Clapton wire mesh, the only truly revolutionary in my opinion. In the Netherlands, we would say “A blow to the bullseye” and I think the technology is suitable mesh Clapton by many companies soon, it was good.
Two coils do not have any problems with chain vaping all, highly saturated axis relentlessly. I’ll have some accumulation of condensation through the air high speed, overtime, to slightly below the ring moisty air flow,

Conclusion:

Looking for a drop tank SubOhm coil which provides a fantastic flavor? Then this may be your best option right now. Wire mesh is really great Clapton. I highly recommend this SubOhm tank, but keep in mind it is my opinion

If there is a downside to mention that it would be difficult to take a roll with his bare hands, and the fact that the coils do not come sealed and a little dirty.
One good thing about this tank is the price, you can get them from various sites for under $ 20 and you get three coils inside the box!

Thank you for reading, take care!
Sjoerd

Voopoo Drag X 80W 4.5ml And Black

Voopoo Drag X 80W 4.5ml and black ink painting of carbon fiber. Voopoo technical systems in millions of colors, seven colors available for your choice Voopoo spray kit is powered by a maximum output and built-in battery can not be less than 40W Voopoo vape.NAVI MOD POD

Inhalation of air flow products, breath control and breathe fresh air and configurable user: Voopoo Vinci innovative X airbox three streams for me! Covering a rechargeable hand – size 3.8 ml of the basic capabilities of your vaping experience. The software also comes with a sliding box kit Mini NAVI Voopoo two coils and spraying the skin slipping PnP MV4 series. Secondly, it will bring the best experience of the delicate flavor and thick clouds.

Scroll Voopoo Drag Manual What’more NAVI overcome this sensitivity is unprecedented and the force of the blast, the independent innovation through the air, the air input mode NAVI enough for air replacement and subvert many special knowledge. And probably not smart playlist VW coil Voopoo X sliding friction have cake and other functions. For additional security, the protection of seven to support: Voopoo Avenger circuits against overload, protecting the maximum power – Protection of protection against voltage surges and diacharge – temperature protection. In short, a fantastic and very nice, just be happy and enjoy vaping all day.

The Voopoo Drag Starter Kit Adopted

The Voopoo Drag Starter Kit adopted a new chip with integrated 1500mAh battery to support the automatic and manual modes to meet your different needs. It also comes with a practical capacity and juice 3.8 ml / 2 ml (TPD) in the mouthend of fine droplets. Furthermore, Voopoo Vinci Mod adopts the innovative flow with three patented pneumatic air to breathe independently. In addition to the features that support all coils as coils Slide 2 platinum mesh Voopoo NAVI clouds get very good taste and rich.

A Drag Voopoo same 157W, Voopoo Vinci RBA is a highly portable enclosure system with the power of traditional mod box. The kit FETCH MINI comes with a 1200mAh battery connection and resistant design dust resistant the oil pod is compatible with the RPM and families.Featuring NORTH coil details elegant glass, body color, Voopoo Drag X Pod capacity internal battery 1200mAh 40W and 5W watts variables. Swipe the screen Voopoo all price data for vaping and single fire button and two buttons ideal for compact and ergonomic feel. Take pods MINI available in two configurations and the magnetic characteristics of the connection.

Voopoo Navi