I received a gift from heaven average Ehpro Cold Steel 200 purposes of this review.
The color of the Ehpro Kelpie:
– The corrosion of iron
– Size: 25 x 40 mm
– Capacity: 2 ml (a glass bubble tube included 3.5 ml)
– Material: Steel Glass / Steel
– Topic: About 510
In the frame:
– 2 ml Ehpro Kelpie RTA
– Glass tubes 3.5 ml
– Philips head screws
– User’s Guide
– Warranty card
– Certification Map
Average Kelpie designed by Vic youtube channel vaping With Vic and produced by Ehpro Fusion. There is a coil atomize and is available in two colors, I received a stainless steel. Spray comes in a nice package in the package, receive and cotton rolls, so if you do not, you can use cotton coil and whose packaging is very good, also in the package you will receive a glass bubble tanks. In the upper eyelid, you can see some details are very nice and the air flow ring, you can see some details with adjusting the airflow. In the upper eyelid, you can see the “Kelpie” recorded and you can see the arrow on the room you can see the engraved logo. From the bottom of the atomizer You can see the standard and the information we have here 510 gold-plated pins and thread here either.
With the atomizer, you will receive a 810 point drop, drip tip is preinstalled and falls finish a very nice place and I think it is very convenient to use. In the atomizer, you can use the other end of the 810 leaves you if it does so.
This is the atomizer over the filling and have a sliding system here, so basically you just need to push the envelope to fill the tank. In the upper eyelid, you can see the arrow is where you have to push the lid and pressing the top cover, you can see the fill hole and the hole large enough, you will be able to use what the bottle is here without any problems. There is nothing to escape filling the sprayer is excellent. On the upper deck, the top deck is a little loose, I want more tension here, but still above the roof itself Openet never in my pocket so far is good. However, the spray is very easy to complete and can do so without any problems.
Atomizer equipped with two glass tanks, a tank regular glass and has a capacity of tank 2 ml, this capacity may be fine for some people. The other comes in the package is a glass bubble tank and the tank has a capacity of 3.5 ml capacity, which is good considering the size of the tank. In this atomizer I want to use a glass bubble tanks to capacity and think this is a great favor, because many people will be using the tank glass bubble. O upper clamp ring of the tank is very good, so basically, the coil can be changed or cotton when it left liquid in the tank well email.
Building a platform spray is much more interesting in the construction of a platform can see four posts and a pro here is that it can essentially a coil regardless of coil wound, while the coil wire is on the same side you can always put a reel on building a platform, very big pro in my opinion.
While screw holding reel units lead the fixing screw is good, but a very small screw and it will be a scam, but it is always a good live performance.
In the atomizer is the construction of a bridge, one can see a large number of holes airflow, 30 holes, you can see the air flow, so that the air flow will hit the lower reel and wound coils a very good team. Perhaps it could be better than the holes in a row on each side is not here because the air flow of the last line of drilling spools missing. Also on the cover, one can see two slots wick. Harnessing cotton can almost easy average and can easily be put on the bridge.
Basically, you can see the control ring airflow and ring, you can be seen two holes airflow. You can easily adjust the airflow and that fits on the one hand, it will be the same on the other side, we also have a plug here.
How does it work? Atomizer and my mind:
Let me start with the packaging, really they are included in the package two coils and cotton because someone uses a packing coil and cotton, I think this is a great advantage and I think that each atomizer should send coil and cotton, as I like a lot in the package, you will receive a glass tank with a tank capacity of the bubble in a better way.
Average construction is very simple and easy, great advantage that no matter how the coils will be able to place the Ehpro Panther on the deck wrapped, but the small screw and defrauding someone, work well without new screws problem. In this atomizer I want to use a coil of 3 mm in diameter and I would advise you to 3 mm coil atomizer, because I think it works better with 3mm coil. Ehpro 101 Pro is very easy, so, I suggest you put cotton as I did in the picture you can see how it looks. It is very important for cotton as I did because of the amount of absorption and no leaks. So if you do everything I no problems with leaks and moisture wicking.
Fill the hole at the top is good and you will be able to fill the tank with a very good bottle, but I believe that the tension in the upper lid should be better, once again, was never opened by itself, even very good.
Average taste was fine, or I could say a lot of taste, but I believe the taste will be better with fewer holes in the platform, but it’s a definite sense hunter.
airflow atomizer is very good, very smooth air flow and air flow really here, also restricts ariflow I like personally and the airflow is very good for me and my style vaping.
So this is a very good repellent especially if you want to buy good taste atomizer, because with it you will get a good taste it is also very smooth airflow and establish a good quality.
– screw a very small platform
– I want more pressure on the upper deck
– Good build quality
– I love design
– Pointe drip Practice
– Coils and cotton in the package
– No leakage
– easy to fill
– cotton can be changed when the liquid is left in the tank
– The very smooth airflow
– the air flow honeycomb coil
– Excellent taste
– Easy to adjust the airflow
– tank glass bubble in the package
– It’s easy to build
– Is easy axis
– You can put a little matter how the coil is wrapped
Thank you gift from the sky